中文 CN
Common problems and solutions when using PVC decorative film
Problem 1: During the installation process, the membrane rolls are wrinkled or bubbles appear
During the installation process, if wrinkles or bubbles are found on the membrane roll.
The following solutions can be adopted:
1. Spray some water or soapy water on the surface that needs to be covered to make it moist, and then apply a film.
2. This can avoid membrane curling or bubble formation due to excessive friction.
3. Use a professional hot air gun to blow the hot film to make it soft and elastic. Then, during the film application process, gradually tension the film to avoid bubbles.
4. If bubbles appear, you can use a pointed object to break them and make them as flat as possible.
5. Blow hot with a hot air gun and tension the surface of the film again to avoid the generation of bubbles again.
Summary:
Problem 1: During the installation process, the membrane rolls are wrinkled or bubbles appear During the installation process, if wrinkles or bubbles are found on the membrane roll. The following solutions can be adopted: 1. Spray some water or soapy water on the surface that needs to be covered to make it moist, and then apply a film. 2. This can avoid membrane curling or bubble formation due to excessive friction. 3. Use a professional hot air gun to blow the hot film to make it soft and elastic. Then, during the film application process, gradually tension the film to avoid bubbles. 4. If bubbles appear, you can use a pointed object to break them and make them as flat as possible. 5. Blow hot with a hot air gun and tension the surface of the film again to avoid the generation of bubbles again.
Release Date:
Aug 04,2023
More News
Still have any question?
Get a free consultancy!
You can contact us through phone:
Tel：+86 153 5802 6079 ( Jacob Sun ) E-mail: jacob@micharra.cn / charoncao@micharra.cn